Complete Row Crop Flaming Kits
Red Dragon® Row Crop Flaming Kits are available in two styles which can be mounted on your toolbar or cultivator. Kits are available in 2, 4, 6, 8, 12 & 16 row configuration with either skid style legs or drop legs.
RKS Skid Leg Kit
(Model 4-RKS Four Row Kit Shown)
RKS Skid Style kits feature the same tool bar legs as our complete units and allow the torches to remain at a consistent height while flaming. RK kits feature drop tool bar legs which are perfect if you do not want the ground disturbed by skids. If you purchase a kit, you will be responsible for devising your own safe tank mounting system, roll cage and control protection. Kits include everything else you need to connect to your tank including custom mounting brackets for the tool bar legs - just give us the dimensions of your tool bar.
3 Burner Models To Choose From Based on Row Spacing:
LT 1 1/2 x 8 D
This is our standard Row Crop Burner. It projects a sweeping flame up to 10" wide and 33" long.
LT 2 x 8
This optional Row Crop Burner projects a sweeping flame up to 18" wide and 36" long.
LT 1 1/2 x 6
This optional Row Crop Burner projects a concentrated flame up to 6" wide and 16" long.
Customer Testimonial:
My wife and I have a 15 acre farm in Phoenix Arizona where we grow vegetables using organic methods. In growing organically we are very limited when it comes to weed control (we seem to grow more weeds than vegetables). I watched your videos on Row Crop equipment and was sold on the idea. Your staff was extremely helpful. I must admit I was terrified at the thought of aiming a torch at the base of my sweet corn even though I had seen it done in the videos. I think the hardest thing I have ever done was letting my foot off the clutch the first time I drove through my corn with my 2-Row Burner. But guess what?...The corn survived just fine and the weeds did not!
Bob Berglund - Grandma's Farm
IMPORTANT NOTE ABOUT LP TANKS:
Always consult your propane dealer about purchasing the proper tank or have them check your existing tank to make sure it is clean and safe before you begin flaming. You MUST use a propane tank equipped with a Liquid Withdrawal Valve. Do NOT use a bottom withdrawal valve as any possible debris or scale may plug torches or solenoids down the line. We recommend a top-mounted, liquid withdrawal valve with a dip tube which reaches close to, but does not rest on the bottom of the tank. Clean fuel and tank are critical for optimum performance of all flaming equipment. Please check with us before selecting your propane tank.
FIND OUT MORE TODAY:
For more information about Red Dragon® Row Crop Flaming please visit our Row Crop Flaming FAQs page and our on-line Agricultural Flaming Guide or call and talk to one of our customer representatives toll free at 888-388-6724 between 8:00 a.m. and 5:00 p.m., M-F, Central Standard Time. Be sure to ask about our FREE Row Crop Flaming Video or watch it today!
ROW CROP FLAMING KITS INCLUDE:
- Complete manifold assemblies with electronic solenoids.
- Cab control box with master shut-off switch
- Toolbar leg assemblies for Skid Style
- All burners required for your configuration
- All necessary hoses cut to length with brass fittings.
- Fuel Strainer
- Custom Mounting Brackets for the Toolbar legs
- Valve Protector
- Red Dragon® Vapor Torch Kit for lighting torches
Model Numbers:
- 2 Row Skid Leg Kit
- 2 RKS
- 4 Row Skid Leg Kit
- 4 RKS
- 6 Row Skid Leg Kit
- 6 RKS
- 8 Row Skid Leg Kit
- 8 RKS
- 12 Row Skid Leg Kit
- 12 RKS
- 16 Row Skid Leg Kit
- 16 RKS